Attaching/Removing The Aw Main Body - JUKI AW-3S Instruction Manual

4-7. Attaching/removing the AW main body

WARNING :
1. Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
2. Put the AW main body in a safe place.
Be sure to remove the sensor cover connector before detaching the cover from the AW
device.
1) Detach the sensor cover referring to
Remove four screws ❶ . Carry out maintenance.
2)
❶
"4-1. Attaching / removing the cover"
– 43 –
❶
p.38.