JUKI AW-3S Instruction Manual page 28

3-11-8. Setting the number of stitches to be sewn before changing the bobbin
A
<Mode changeover screen>
B
<Counter setting screen>
1. Under the automatic mode, the set value of counter is automatically updated. So, do not
change it.
2. The remaining-thread length is 8 m at the maximum.
Be aware that a remaining-thread removal error may occur if the length of thread to be
removed exceeds 8 m. It is recommended to set the number of stitches to be sewn be-
fore changing the bobbin so that the remaining thread length is 8 m or less.
The number of stitches to be sewn before changing the
bobbin has to be set only under the manual mode. In the
case of the auto mode, preset number of stitches will be
automatically updated.
The number of stitches to be sewn before changing the bobbin
is set on the counter setting screen. The bobbin thread counter
indicates the number of stitches to be sewn before changing the
bobbin. Press
the counter setting screen.
B : Number-of-stitches counter type button
When this button is pressed, the counter-type screen is dis-
played. Counting method can be selected between the UP
counter and DOWN counter. Do not select "disable the count-
er".
C : Counter current-value button
When this button is pressed, the counter current-value screen
D
is displayed. On this screen, the current count value can be
C
set and cleared. The unit of the counter set value is "×10"
stitches.
D : Counter set value button
When this button is pressed, the counter set value screen is
displayed. On this screen, the counter set value can be set
and cleared. The unit of the counter set value is "×10" stitch-
es.
Number of stitches : Min. 10 stitches (Display: 1)
– 26 –
A on the mode changeover screen to display
Max. 99990 stitches (Display: 9999)