Download  Print this page

Presetting Radio Stations; Tuning Radio Stations; Selecting A Preset Station - Sony STR-DN2010 Operating Instructions Manual

Multi channel av receiver.
Hide thumbs

Advertisement

Table of Contents
1)
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only blank
spaces have been entered or it is same as the
input name.
2)
Stream information may not be displayed.
3)
This information also appears for non-RDS
FM stations.
4)
Type of program being broadcast.
5)
Text messages sent by the RDS station.
Note
Character or marks may not be displayed for some
languages.
Listening to the FM/AM radio
For details on the tuner function, see "Tuner
Operations" (page 61).

Tuning radio stations

1
Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR +/–
on the receiver.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
Selecting a frequency directly
(Direct Tuning)
1
After selecting the FM or AM band,
press D.TUNING.
2
Press SHIFT, then press numeric
buttons to enter the frequency.
3
Press
.
GB
128

Presetting radio stations

1
Tune in the station that you
want to preset.
For details on the operation, see "Tuning
radio stations" (page 128).
2
Press SHIFT, then press
MEMORY.
"MEM" lights up for a few seconds.
Perform steps 3 and 4 before "MEM"
disappears.
3
Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If "MEM" disappears before
you select the preset number, start again
from step 2.
4
Press ENTER.
If SHIFT indicator is light off before you
press ENTER, press SHIFT.
The station is stored as the selected preset
number.
If "MEM" disappears before you press
ENTER, start again from step 2.
5
Repeat steps 1 to 4 to preset
another station.

Selecting a preset station

1
Press TUNER repeatedly to select the
FM or AM band.
2
Press PRESET + or PRESET –
repeatedly to select the preset station
you want.
You can also press SHIFT, then press
numeric buttons to select the preset station
you want. Then, press
selection.
to enter the

Advertisement

Table of Contents

   Related Manuals for Sony STR-DN2010

Comments to this Manuals

Symbols: 0
Latest comments:
  • Peter alex Feb 24, 2017 03:57:
    My receiver blinks 3 times protector then shuts down can you help me with this problem