System Settings Menu - Sony STR-DN2010 Operating Instructions Manual

System Settings menu

You can customize the settings of the receiver.
Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
x OFF
Does not switch to standby mode.
x ON
Switches to standby mode after approximately
30 minutes.
Notes
• This function does not work in the following cases.
– "FM TUNER", "AM TUNER", "SIRIUS",
"SERVER", "Rhapsody" or "SHOUTcast" input
is selected.
– S-AIR receiver or surround amplifier is used.
– "External Control" is set to "ON".
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Software Version
You can check the version of the software on
the system of the receiver, and you can also
update the software of the receiver.
You can also update the software of the
receiver using the Setup Manager application
software provided on the CD-ROM supplied
with the receiver. For details, see "Updating
the receiver software using the Setup
Manager" (page 89).
To update the receiver using the
menu
1
Press V/v repeatedly to select
"Software Version", then press
2
Select "Update via Internet", then press
.
The current software version and latest
software version are displayed on the TV
screen.
3
Press B/b repeatedly to select
"Update", then press
A confirmation screen appears on the TV
screen.
4
Press B/b repeatedly to select "Start",
then press
Receiver updating starts.
The MULTI CHANNEL DECODING
indicator on the front panel flashes while
updating.
When the updating complete, the receiver
will restart automatically.
Notes
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
performed.
– When all versions are the latest one.
– When the receiver cannot retrieve the data, such
as when the network has not been set up, or when
the server is down, etc.
• Do not turn the receiver off or disconnect the
network cable during software updating. It may
cause a malfunction.
• It may take 50 minutes for the software updating to
complete.
.
.
.
121
GB