Getting Started - Sony STR-DN2010 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DN2010:
Table of Contents

Advertisement

Getting started

You can enjoy your audio/video components connected to the receiver by following the simple
steps below.
Installing and connecting the speakers
See "1: Installing the speakers" (page 19) and "2: Connecting the speakers" (page 21).
Checking the connection appropriate for your components
Connecting the TV and video components
The image quality depends on the connecting jack. See the illustration on the
right. Select the connection according to the jacks on your components.
Q: Does your TV have an HDMI jack?
t No: See the connection for a TV without an HDMI jack (page 23).
t Yes: See the connection for the TV with HDMI jack (page 23).
Q: Does your video component have an HDMI
jack?
t No: See "Connecting components without HDMI jacks" (page 28).
t Yes: See "Connecting components with HDMI jacks" (page 25).
Connecting the audio components
See "4b: Connecting the audio components" (page 34).
Setting the audio output settings on the connected components
To output multi channel digital audio, check the digital audio output setting on the connected components.
For a Blu-ray Disc player, check that "Audio (HDMI)", "Dolby Digital (Coaxial/Optical)", and "DTS (Coaxial/Optical)"
are set to "Auto", "Dolby Digital" and "DTS" respectively (as of March 2010).
For a "PlayStation 3", check that "BD Audio Output Format" is set to "Bitstream" (with system software version 3.15).
For details, refer to the operating instructions supplied with the connected components.
Preparing the receiver
See "8: Connecting the AC power cord (mains lead)" (page 39) and "Initializing the receiver" (page 39).
Setting the speakers
Select the speaker pattern, then perform Auto Calibration. For details, see "Setting the speakers" (page 40) and "Calibrating
the appropriate speaker settings automatically (Auto Calibration)" (page 42).
Note
You can check the speaker connection using "Test Tone" (page 111). If the sound is not output correctly, check the speaker
connection and make the settings explained above again.
GB
18
COMPONENT VIDEO
Y
HDMI
P
C
/
B
B
P
C
/
R
R
Digital
Analog
High quality image
VIDEO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents