Using a controller
You can do the following using a device which
has a control function on the home network.
– Playing back content stored on the server
with the receiver.
– Operating the receiver using Windows 7
based computer with Windows Media Player
12.
Note
Before you operate the receiver using a controller,
you have to set the controller you want to use to
match the receiver. Set “External Control” to “ON”,
then set “Controllers” in the Network Settings menu.
For details on settings for controllers, see
“Controllers” (page 119).
Enjoying content stored on the
server
You can enjoy or check the status of content
(music, photos and videos) on the server using
a controller.
The following operation are supported.
• Playback, stop, pause, fast forward and fast
backward of content
• Go to the next/previous content item
• Check the elapsed time of the currently
playing content
Notes
• Some operation may not be performed, depending
on the device used as a controller, the content type,
or the server. For details, refer to the operating
instructions of each device.
• If you operate the receiver using the supplied
remote together with a controller, the receiver may
not work properly.
continued
GB
Page 81