Sony STR-DN2010 Operating Instructions Manual page 127

Menu Parameters
[Display] [Display]
System settings Naming inputs
[<SYSTEM>] [NAME IN]
Auto standby mode
[AUTO STBY]
Version display
[VER. X.XXX]
Updating from PC
[UPDATE (PC)]
a)
Depends on the speaker pattern setting, some parameters or settings may not be available.
b)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
c)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back or front high
speakers (page 40).
d)
"METER" for European model.
e)
You can only select this parameter if your speaker is set to "SMALL".
f)
You can only select this parameter if you select "C.ST.EX A", "C.ST.EX B" or "C.ST.EX C" as sound field.
g)
This parameter is available for the USA model only. You can only select this parameter if the SiriusConnect
Home tuner is connected to the SIRIUS jack on the receiver.
h)
This parameter is only available when HDMI input is selected.
i)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
To view the information on the
display
You can check the sound field, etc., by
changing the information on the display.
1
Select the input for which you want to
check the information.
2
Press AMP, then press DISPLAY
repeatedly.
Each time you press DISPLAY, the display
will change cyclically as follows.
Index name of the input
selected t Sound field currently
applied t Volume level t Stream
2)
information
When listening to FM and AM radio
Preset station name
Sound field currently applied t Volume
level
1)
t Input you
1)
t Frequency t
Settings
For details, see "Naming the input
(Name Input)" (page 55).
ON, OFF
PERMIT, DENY
When tuning in a channel from a
SIRIUS
(USA model only)
Channel name t Channel number t
Category name t Artist name/Feature t
Song/program title t Composer name t
Signal strength t Sound field currently
applied t Volume level
When receiving RDS broadcasts
(European model only)
Program Service name
Band, or Preset number t Frequency,
band and preset number t Program Type
4)
t Radio Text indication
indication
Clock Time t Sound field currently
applied t Volume level
Initial
setting
ON
DENY
3)
, Preset name,
5)
t
continued
GB
127