Sony STR-DN2010 Operating Instructions Manual page 129

Listening to satellite radio
(USA model only)
For details on SIRIUS Radio service, see
"Listening to Satellite Radio" (page 65) in
"Tuner Operations".
Aiming the SIRIUS Antenna
You can use "SR ANT AIM" in the Tuner
Settings menu to help you aim the antenna for
optimal signal reception.
1
Press TUNER repeatedly to select
"SIRIUS".
You can also use INPUT SELECTOR +/–
on the receiver.
2
Press AMP.
3
Press MENU.
4
Press V/v repeatedly to select
"<TUNER>".
5
Press or b to enter the menu.
6
Press V/v repeatedly to select
"SR ANT AIM".
7
Press or b to enter the parameter.
8
While checking the parameter, aim
your antenna to where the best
reception will be received.
For details on the parameter, see "SIRIUS
Signal strength" below.
SIRIUS Signal strength
Signal
strength
EXC (excellent)
GOOD
WEAK
NONE
Signal type
Satellite Terrestrial
S:3 T:3
S:2 T:2
S:1 T:1
S:0 T:0
Checking the ID number
1
Press TUNER repeatedly to select
"SIRIUS".
You can also use INPUT SELECTOR +/–
on the receiver.
2
Press TUNING + or TUNING – to select
channel 0.
3
Check the SIRIUS ID on the display
and write it in the space provided here.
SIRIUS ID:___________________________
Selecting channels from a
category (CATEGORY TUNING)
1
Press TUNER repeatedly to select
"SIRIUS".
You can also use INPUT SELECTOR +/–
on the receiver.
2
Press CATEGORY MODE repeatedly
to select "ONE CAT".
• ALL CAT: You can select a channel from
all the categories. The initial setting is
"ALL CAT".
• ONE CAT: You can select a channel from
one category. "CAT" lights up on the
display when you set to "ONE CAT"
mode.
3
Press CATEGORY + or CATEGORY –
to select the category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press TUNING + or TUNING – to select
the channel.
Selecting a channel number
directly (Direct Tuning)
1
After selecting satellite tuner, press
D.TUNING.
2
Press SHIFT, then press numeric
buttons to enter the channel number.
3
Press .
GB
129