How To Enter The Menu; How To Configure Units - Omega LVU800 Series User Manual

GETTING STARTED (continued)
How to enter the MENU:
1. Press and hold SELECT key (approximately 5 seconds) until MENU is displayed.
2. The menu items will rotate through display.
3. Press SELECT to change an item.
How to configure UNITS:
1. In the MENU mode, press select when UNITS is display.
2. Press SELECT to choose between INCHES, CM (centimeter),
FEET, METERS or PERCENT.
3. Select EXIT to return to the Top Level Menu.
Note: Reading the level of liquid in Percent:
 Omega Engineering recommends that when selecting PERCENT, configure the HEIGHT and FILL‐H
settings before selecting PERCENT in order to span the LVU800 Series for your application
requirements.
 When in PERCENT, the operational span will be based upon the last TANK settings, typically the factory
settings for HEIGHT and FILL‐H.
LVU800 Series
LVU809 Series
LVU816 Series
LVU826 Series
LVU832 Series
 When PERCENT is selected, the TANK settings (HEIGHT and FILL‐H) will be disabled.
118.1" (300 cm)
216.5" (550 cm)
314.9" (800 cm)
393.7" (1000 cm)
HEIGHT
9
FILL‐H
114.1" (290 cm)
208.5" (530 cm)
307.1" (780 cm)
381.9" (970 cm)
Step Four