Change Positions On The Drapery Track (Dual) - Current Silent Trac Optional Programming Steps

1. ENTER LEARN OPEN POSITION MODE
Change the open Position for the Room Side drapery (Motor 1)
Pull down and release the Pendant so the room side drapery moves
towards the direction you would like to set as the "open" position.
See Figure 9.
After the drapery reaches the position, it will stop moving. Pull
down and hold the Pendant for five seconds, or until the drapery
jogs. See Figure 10.
Release the Pendant.
2. SET THE OPEN POSITION
By hand, pull the curtain until it reaches the desired full open
position. See Figure 11.
3. EXIT LEARN POSITION MODE
Pull down and release the Pendant once to exit learn mode. The
drapery will jog to confirm it has learned this position. See Figure
12.
II. Change Positions on the drapery Track (dual)
Figure 9 - Pull down Pendant to move room side
Figure 10 - Pull down and hold the Pendant for 5 seconds, then release
Figure 11 - Pull the drapery by hand to the desired full open position
Figure 12 - Pull down and release the Pendant
4
drapery to open position