Master Reset - Current Silent Trac Optional Programming Steps

In some instances it may become necessary to master reset your drapery. Performing a master reset will restore the drapery to
its factory settings, erasing saved open and closed positions, groups, and all paired remotes.
1. REMOVE POWER
Disconnect power from the unit. For hardwired units, simply
unplug the device. For battery powered units, remove the battery
tube by twisting it off of the connection wire. See Figure 35.
With power disconnected, pull down on the Pendant or
cord and release once. See Figure 36.
2. SETUP THE DRAPERY FOR RESET
Move the drapery to a position halfway between full open and full
closed. See Figure 37.
3. RECONNECT POWER
Reconnect power to the unit by plugging the unit back in or by
reconnecting the battery tube. See Figure 38.
4. PERFORM MASTER RESET
Pull down on the Pendant and hold for 10 seconds or until the
drapery jogs.
Next, push up on the Pendant for 10 seconds or until the drapery
jogs. See Figure 39.
Your drapery has now been master reset.
VI. Master Reset the Drapery
11
Figure 35 - Disconnect power
Figure 36 - Pull down on Pendant or cord and release once
Figure 37 - Move drapery to halfway between full open and full closed
Figure 38 - Reconnect power
Figure 39 - Pull down and hold Pendant and lift up and hold Pendant