Current Silent Trac Optional Programming Steps page 5

1. ENTER LEARN CLOSE POSITION MODE
Change the Close Position for the room side drapery (MOTOR 1)
Pull down and release the Pendant so the drapery moves towards
the direction you would like to set as the "close" position. See Figure
13.
After the drapery reaches the position, it will stop moving. Pull
down and hold the Pendant for five seconds, or until the drapery
jogs. See Figure 14.
Release the Pendant.
2. SET THE CLOSE POSITION
By hand, pull the curtain until it reaches the desired full close
position. See Figure 15.
3. EXIT LEARN CLOSE POSITION MODE
Pull down and release the Pendant once to exit learn mode. The
drapery will jog to confirm it has learned this position. See Figure
16.
Figure 13 - Pull down Pendant to move room side
drapery to closed position
Figure 14 - Pull down and hold the Pendant for 5 seconds, then release
Figure 15 - Pull the drapery by hand to the desired full closed position
Figure 16 - Pull down and release the Pendant
5