Pairing The Remote To The Drapery (Fm) - Current Silent Trac Optional Programming Steps

1. INITIATE LEARN MODE
Pull down and release the Pendant twice to enter learn mode.
After the first tug, the drapery should start moving. The second
tug should stop it. See Figure 25.
2. CONNECT THE REMOTE
On multi-channel remotes, select the channel you wish to pair to
by pressing the Channel button until the LED corresponding with
the appropriate channel is lit. See Figure 26.
Depress the "pairing" button on the back of the remote by pushing
a pen or other object through the hole in the back of the remote.
The LEDs on the front will scroll. See Figure 27.
Press and release the top left button on the remote. The drapery
will jog to confirm pairing has been successful. See Figure 28.
III. Pair the Remote to the drapery (FM)
Figure 25 - Pull down and release Pendant
Figure 26 - Select channel by pressing channel button
Figure 27 - Depress pairing button on back of remote
Figure 28 - Press and release top left button on remote
8
2x