Enable Or Disable Smart Assist - Current Silent Trac Optional Programming Steps

Smart Assist allows users to pull the curtain manually and have the movement complete automatically. All drapery tracks come
with Smart Assist enabled.
1. MANUALLY MOVE THE DRAPERY
Begin with the drapery in the full open or full closed position.
Manually move the drapery more than a foot towards the opposite
direction. If Smart Assist is enabled, the drapery will begin to
complete the movement automatically. If Smart Assist is disabled,
the drapery will remain in place. See Figure 29.

2. ENABLE OR DISABLE SMART ASSIST

To disable Smart Assist pull down and hold the Pendant for five
seconds or until the drapery jogs, then release. Be sure to pull down
on the Pendant before the drapery reaches its limit. See Figure 30.
To enable Smart Assist, pull down on the Pendant for five seconds
or until the drapery jogs, then release. See Figure 31.
3. CONFIRM
Pull down and release the Pendant once to confirm. The drapery
will jog to confirm Smart Assist has been enabled or disabled. See
Figure 32.
IV. Enable or disable smart assist
Figure 29 - Manually move the drapery one foot
Figure 30 - Pull down and hold Pendant for 5 seconds
Figure 31 - Pull down and hold Pendant for 5 seconds
Figure 32 - Pull down and release Pendant once
9