Grouping Multiple Drapery Together (Control Box Required) - Current Silent Trac Optional Programming Steps

The grouping feature is available on all units with a sensor box. Grouping allows users to control multiple units simultaneously
with one manual command. Grouping also allows units to move together simultaneously when any one unit in the group has a
sensor automated command triggered.
1. ENTER PAIRING MODE
On each drapery you would like to group, press and hold all three
buttons on the sensor box until all three LEDs flash green. See
Figure 33.
2. CONFIRM GROUPING
On a central unit you would like to designate as the 'Master', press
and hold all three buttons on the sensor box until all three LEDs
flash green. See Figure 34.
Each drapery will jog to confirm it has been successfully grouped.
V. Grouping Multiple Drapery Together
Figure 33 - Press and hold all 3 buttons
Figure 34 - Press and hold all 3 buttons
10