Using The Drapery Track; Using The Pendant For Operation; Using Smart Assist - Current SILENT TRAC User Manual & Owners Manual

Table of Contents

Using the Drapery Track

The Pendant, can be pulled down or pushed up, depending on the desired movement.

On a single drapery, pulling the Pendant down activates the curtain. Pulling down once makes the curtain move towards the

next position, depending on if the curtain is open or closed. Pushing the Pendant up will stop it. Pulling down a second time after

stopping will allow the curtain to move in the opposite direction.

On a dual drapery, pulling the Pendant down activates the curtain plugged into the motor 1 slot. Pulling down once makes the

curtain move towards the next position, depending on if the curtain is open or closed. Pulling down a second time will stop it.

Pulling down a third time, shortly after stopping will allow the curtain to move in the same direction as before. Pulling down after

several seconds will change the direction the curtain moves.

Pushing up on the Pendant will activate the curtain plugged into the motor 2 slot. Pushing up once makes the curtain move

towards the next position, depending on if the drapery is open or closed. Pushing up a second time will stop it. Pushing up a third

time, shortly after stopping will allow the curtain to move in the same direction as before. Pulling down after several seconds will

change the direction the curtain moves.

Smart Assist is a drapery track feature to allow users the ability to begin an open or close movement manually, and have the

drapery automatically complete the movement.

To trigger Smart Assist, simply pull the curtain approximately one foot towards the direction you would like to move the curtain.

Upon release, the curtain will continue moving in that direction until it reaches the full open or closed position.

Table of Contents