Page 1
Fascia Installation Guide Install the Fascia ..2 Removing a Fascia Clip ..3 Statements ..4...
Page 2
I. Install the Fascia 1. Install the Clips On ceiling mount installations, confirm the fascia clips are already installed on the track drapery, then proceed to step 2. On wall mounted track installations, snap the fascia clips into the recess at the top of the drapery track, one side at a time. Use a fascia clip between each set of brackets.
Page 3
4. Style the Returns Most fascia styles allow for returns to be bent in either a rounded or angled manner in the field. By hand, gently bend the fascia ends into the desired shape. See Figure 4. For hard bends, we recommend removing the fascia from the clips, then using a flat surface like a table to help bend the fascia.
Warning: Changes or modifications not expressly approved by Current Products Co. could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.