Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Current Manuals
  4. Home Automation
  5. SILENT TRAC
  6. Setup manual

Current SILENT TRAC Setup Manual

Hide thumbs Also See for SILENT TRAC:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Bridge Set Up Guide
Set up with the bridge and app
..........2
Set up with the bridge (no app)
..........4
Pair the remote to the Drapery
..........5
Remove the drapery from a network
..........7
Statements
..........8
1

Advertisement

loading

Related Manuals for Current SILENT TRAC

Summary of Contents for Current SILENT TRAC

  • Page 1 Bridge Set Up Guide Set up with the bridge and app ..2 Set up with the bridge (no app) ..4 Pair the remote to the Drapery ..5 Remove the drapery from a network ..7 Statements ..8...

  • Page 2: Download The App

    I. Setup with the bridge with app or call 1-844-307-7435. 1. DOWNLOAD THE APP Download the Current Products Corp. app from the Google Play Store or the App Store. Follow the prompts to set up your account. 2. POWER THE BRIDGE Find an outlet in a location central to the drapery you are installing in the home.
  • Page 3 4. PAIR AND ADD THE DEVICES In the app under devices, hit the + sign. See Figure 5. Beach House Figure 5 - Hit the + to add a device On any drapery you wish to pair to the bridge (you can add more than one devide at a time), pull down and release the Pendant once to start the drapery, then once to stop it.
  • Page 4 II. Setup with the bridge Only (No App) 1. POWER THE BRIDGE Find an outlet in a location central to the drapery that you are installing in the home. Insert the micro-usb end of the included power cable into the power port on the bridge. Plug the other end of the cable into an outlet.
  • Page 5 1. PAIR REMOTE TO BRIDGE III. Pair the Remote to the drapery (Zigbee) If using the Current Products Corp. bridge, use a tack or paperclip to press and hold down the button on the bottom of the bridge for 5 seconds. After 5 seconds, release the button to put the bridge in pairing mode.
  • Page 6 Pull the “Pull” tab from the bottom of the remote you would like to pair to the drapery (if the tab has already been removed, press and release any button on the remote face). The LEDs on the front of the remote will scroll back and forth to show it is seeking a bridge to connect to.
  • Page 7 In some instances it may become necessary to remove your drapery from the network. Removing the drapery from the network IV. Remove the drapery from a network will remove the drapery from the bridge and you will need to re-add it back to your network before you can use the remote or app.

  • Page 8: Fcc Statement

    Warning: Changes or modifications not expressly approved by Current Products Co. could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 9 844-307-7435 support@currentproductscorp.com www.currentproductscorp.com...