Maintenance - Elcometer 319 Standard Operating Instructions Manual

Display of the user screen can be toggled 'on' or 'off' (Menu>Setup>User Screen) - see "User Screen" on
page 26.
12.1 CREATING THE USER SCREEN
1. Install and run ElcoMaster software.
2. Connect the gauge to the PC using the USB cable (optional equipment for [S] gauges) or
Bluetooth [T].
3. Switch on the gauge.
4. Ensure that the gauge and ElcoMaster are connected.
5. Click 'Welcome Screen' on the ElcoMaster tool bar and follow the on-screen instructions.
12.2 DELETING THE USER SCREEN
1. Run ElcoMaster.
2. Click 'Welcome Screen'.
3. Select 'No welcome screen'.
Follow the remaining on-screen instructions to delete the user screen.

13 MAINTENANCE

You own one of the finest dewpoint meters in the world. If looked after, it will last a lifetime.
• Always keep the gauge in its protective pouch when not in use.
• The humidity sensor is fragile and should never be touched. Do not use compressed air to clean the
sensors or the gauge.
R
31