4 TAKING READINGS
4.1 SAVING READING DATA INTO ROLLING MEMORY
Follow this procedure to take readings manually with the option to save your reading data into the rolling
memory of your gauge.
Users of the Elcometer 319 Top model can also save reading data into batch memory [T] - see page 14.
Before you start:
•
If required, set low and/or high limits for parameters - see "Set Limits" on page 23.
•
If required, select a method [T] of saving reading data into the rolling memory of your gauge - see
"Manual Logging [T]" on page 26.
Procedure:
1. Switch on the gauge.
The gauge starts measuring.
2. Place the rubber tip of the surface temperature sensor against the surface, preferably at an angle of
90°, and keep it in this position. The trend indicator next to the parameter indicates if the value is
increasing
or decreasing
3. Optional: To hold the reading data on the display press Hold.
4. Optional: To save reading data into the rolling memory of your gauge, press Save or Hold>Save
(depending upon the Manual Logging [T] setting - see page 26).
When you have finished you may want to view the statistical analysis of the reading data - see "Statistics"
on page 19.
. The absence of a trend indicator indicates that the value is stable.
R
13