Care And Maintenance; Spares And Accessories; Warranty Statement; Technical Specification - Elcometer 102 User Manual

5 CARE & MAINTENANCE
To prolong the life of the Elcometer 102:
Lubricate the needle and the area on the hose where the

needle is to be inserted with a little water prior to test.
Do not subject the gauge to strong impact.

Clean the gauge with a soft, dry cloth. Do not use solvents.

6 SPARES & ACCESSORIES
Each gauge is supplied with two needles. Additional spare /
replacement needles are available to purchase separately.
Description
Needle, x2 with storage case

7 WARRANTY STATEMENT

The Elcometer 102 is supplied with a one year warranty against
manufacturing defects, excluding contamination and wear.

8 TECHNICAL SPECIFICATION

Scale Range
Pressure Limitations
Operating Temperature
Gauge Dimensions
(with needle protector tted)
Gauge Weight
(with needle protector tted)
For the avoidance of doubt, please refer to the original English language version.
The Elcometer 102 is packed in a cardboard package. Please ensure that all packaging is
disposed of in an environmentally sensitive manner. Consult your local Environmental Authority for
further guidance.
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU.
R
United Kingdom
All other trademarks acknowledged.
© Elcometer Limited 2018. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
R
0 - 300psi / 0 - 20bar
Steady:
Fluctuating:
Short Time:
-20°C to 60°C (-4°F to 140°F)
133 x 58 x 28.5mm (5.24 x 2.28 x 1.12")
110g (3.88oz)
TMA-0727 Issue 01 - Text with cover 29174
Part Number
T10229425
3/4 x full scale value
2/3 x full scale value
Full scale value