Table of Contents
Advertisement
9 MAINTENANCE
The Elcometer 121/2 Universal P.I.G. is designed to give many years reliable service under normal
operating and storage conditions.
The instrument does not contain any user-serviceable components. In the unlikely event of a fault, the
instrument should be returned to your local Elcometer supplier or directly to Elcometer. Contact details can
be found on the outside cover of these instructions, or on the Elcometer website, www.elcometer.com
10 RELATED EQUIPMENT
In addition to the Elcometer 121/2 Universal P.I.G., Elcometer produces a wide range of other equipment
for testing and measuring the characteristics of coatings. Users of the Elcometer 121/2 may also benefit
from the following Elcometer products:
•
Elcometer 141 Paint Inspection Gauge (for deeper cuts)
•
Elcometer 107 Cross Hatch Cutter
•
Elcometer 195 Säberg Drill
•
Elcometer 456 Coating Thickness Gauge
•
Elcometer Coating Adhesion Testers
For further information contact Elcometer, your local supplier or visit our website at www.elcometer.com
16
Advertisement
Table of Contents
