Main Setup; System Time And System Date - Advantech MIC-5602 User Manual

Advanced mezzanine card processor amc

Table of Contents

4.3

Main Setup

When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You

can always return to the Main setup screen by selecting the Main tab. Two main

setup options are described in this section. The main BIOS setup screen is shown

below.

The main BIOS setup menu screen has two main frames. The left frame displays all

the options that can be configured. "Grayed-out" options cannot be configured while

options in blue can. The right frame displays the key legend. Above the key legend is

an area reserved for a text message. When an option is selected in the left frame, it is

highlighted in white. Often a text message will accompany it.

4.3.1

Use this option to change the system time and date. Highlight System Time or Sys-

tem Date using the <Arrow> keys. Enter new values through the keyboard. Press the

<Tab> key or the <Arrow> keys to move between fields. The date must be entered in

MM/DD/YY format. The time is entered in HH:MM:SS format.

Note!

MIC-5602 User Manual

Figure 4.3 Main Setup Screen

There is no battery-backed up CMOS on the MIC-5602 standard

model therefore the system time and date will not be updated con-

tinuously when the power to the processor AMC is off.

When the BIOS recovery image is forced to execute (see section

2.2.2), the BIOS Image will be displayed as "01".

Table of Contents