Table of Contents
Advertisement
CASTILE INSERT
H. Optional Log Set Placement Instructions
Two Piece Log Set Installation
1. Open door to expose the firebox.
2. Install the left log first and then the right
log (Figure 25.1).
3. Lean the logs against the cast iron brick in the back of
the firebox.
4. Push the logs to the far left and far right against the
sides of the firebox (Figure 25.2).
5. To clean the logs, use a vacuum cleaner and a soft
brush attachment or a paint brush.
CAUTION
Logs are FRAGILE. Use extreme care when handling or
cleaning logs.
Figure 25.1
Figure 25.2
NOTE: Due to the abrasive nature of a pellet appliance
fire, the logs are not covered under warranty.
Any placement variation other than shown here
can cause excessive heat and shall void the
appliance warranty.
25
7022-801H
06/21
Advertisement
Table of Contents
