Securam ProLogic B22 Operation Instructions Manual page 9

ProLogic B22
Step 3: The display will prompt you to enter a code, enter a valid Super or Manager Code, and
press Menu/OK.
Step 4: After entering a valid Super or Manager code, the screen will show "Users".
Press Menu/OK.
Step 5: Scroll "▼"or "▲" to the menu selection "Delete One User" and Press Menu/OK
Step 6: Press the "Menu/OK" button first, then select the user to be deleted through the "▼" or
"▲" button, and finally press the "Menu/OK" button to prompt the screen:
Step 7: Press Menu/OK
This User Code is now deleted from the system.
4.5 Delete All Users
This feature is used to delete all users from the system. Upon executing this command, all users will be
deleted and Manager Code will be reset to default: Manager Code (ID01) 123456
Note: Super Code will not be changed to default, only recover system operation can do this.
Step1: Press the Menu/OK button
Step 2: At "My Menu", press the Menu/OK button
Operation Instructions
9