Table of Contents
Advertisement
Enter the following main data:
SIP server: your SIP server address.
User: your account username.
Domain: your account domain.
Login: username for authentication.
Password: your account password.
If necessary you can also enter additional parameters. To apply new settings click [Save].
NOTE!
Contact your system administrator for local SIP server settings. If you have no a local SIP server then you
can use any Internet SIP server you prefer.
Go to the door station web interface menu for setting SIP connection.
You commonly need specify the following parameters:
Enable SIP #1: put a tick to enable a SIP option.
Name: enter the name to identify a door station.
Number: enter the SIP number for your account.
Username: enter the username for authentication.
Password: enter the password for authentication.
SIP port: enter the SIP port (by default – 5060).
Register on SIP server: put a tick to use a SIP server.
Registration server: enter the domain address for your SIP account.
SIP server: enter the address of your SIP server.
Call recipient #1: enter the SIP number of the device which will receive the call (for
example, SIP number of a PC).
To apply new settings click [Save].
If the settings are correct then you will see the following window after pressing the call
button of a door station:
You can answer or cancel the call.
The setting is finished.
IP Video Door Station DS03M(P) Operation User Manual
Pic. B4
Appendices
57
Advertisement
Table of Contents
