Https - Beward DS03M Operation User's Manual

8.9. HTTPS

The "HTTPS Setting" menu is shown on the Picture 8.9.
A HTTPS protocol allows transferring data being encrypted. The TCP-port 443 is used for the
HTTPS protocol.
Before using HTTPS connection you need to set parameters in the door station web-interface.
You can create a self-signed certificate or make a request for creating the certificate to the
Certification authority.
[Create Self-Signed Certificate]: click to create a self-signed certificate. Fill in the fields in the
pop-up window with necessary information and click [Submit]. The created certificate will be
displayed in the "Installed Certificate" field.
[Create Certificate Request]: click to make a request to the Certification authority. Fill in the
fields in the pop-up window with necessary information and click [Submit]. The created request will
be displayed in the "Created Request" field.
Created Request: the request to the Certification authority is displayed in this field.
[Properties]: click to look through information on the certificate request which needs to be
sent to the Certification authority.
[Remove]: click to remove the certificate request.
[Install Signed Certificate]: click to install the certificate received from the Certification
authority in response to the request you made earlier. This button only becomes available after
making the request. A web-page where you can upload a certificate file opens after clicking the
button. Choose the file with the ".pem" extension and click [Upload]. The certificate you install should
correspond with the request, because the data are compared during the certificate installation.
IP Video Door Station DS03M(P) Operation User Manual
Pic. 8.9
Chapter 8. Config: Network Settings
31