Table of Contents
Advertisement
Chapter 12. Config: System
Pic. 12.5
3. Set door station parameters by default (see paragraph 12.5).
ATTENTION!
Use only appropriate firmware files which conform to the device model! The device may operate
incorrectly and be damaged in case of using an unsuitable firmware file.
Do not disconnect the device from the network while the firmware is upgraded. The door station will have
the IP address 192.168.0.99 after restoring to default settings.
The device breakdown caused by incorrect firmware upgrading is not covered by the warranty.
IP Video Door Station DS03M(P) Operation User Manual
47
Advertisement
Table of Contents
