Restore - Beward DS03M Operation User's Manual

12.5. Restore

The "Restore" menu is shown on the Picture 12.6.
Here you can set the door station by default in case of some problems or after firmware
upgrade. Moreover, you can save the main door station settings as a file to reset them later.
[Export]: click to save door station settings as a file with the ".bak" extension. The file name
contains the date and the time of saving (according to the door station clock).
[Import]: click to reset the settings from the ".bak" file. Click [Browse], choose the file and
click [Import]. After restoring the settings the device will be rebooted.
[Restore]: press this button to set door station parameters by default. Enter the administrator
password and press the [ОК] button to confirm restoring in the opened window. Press [Х] to cancel
restoring.
The door station will be automatically rebooted after restoring the default settings. All the
parameters, including an IP address and a current date, are set by default.
IP Video Door Station DS03M(P) Operation User Manual
Pic. 12.6
Chapter 12. Config: System
48