System Time - Beward DS03M Operation User's Manual

12.2. System Time

The "System Time" menu is shown on the Picture 12.2.
Time Format: choose the time displaying format – 12- or 24-hour.
Time Zone: choose the time zone in accordance with location of the door station.
Current Time: these fields contain current date and time entered manually or synchronized
with an NTP server.
NTP Server: tick off this option to conform time and date with a standard time server (by
default – time.nist.gov) in Internet, using the NTP (Network Time Protocol). You can enter web
address and port of an NTP server in the fields to the right.

Manual/Auto: the two ways an NTP server can be chosen.
Set "Manual" to enter address and port of the NTP server in the fields to the right.
Set "Auto" to let the door station try to use NTP servers from the list by default till the moment
of successful synchronization. The fields to the right will not be available. The list of NTP servers by
default is given in the
Synchronize with Local Computer: press this button to set date and time according to time
settings of the PC which is used for work with the web interface of the door station.
Set the Time Manually: choose it to set date and time manually in the "Current Time" field.
Enable DST: tick off this item to set a daylight saving time option.
DST Type: you can choose the specific date of time advancing ("Date" type) or a day of the
week ("Week" type).
Start / End Time: set the time of advancing and backward adjusting.
DST Bias: set a size of the time shift.
Press the [Save] button to apply new settings.
IP Video Door Station DS03M(P) Operation User Manual
Appendix A.
Pic. 12.2
Chapter 12. Config: System
44