Table of Contents
Advertisement
The "Controller Settings" menu is shown on the Picture 11.1.
The package contents may include a 1-channel (DS03M(C1) / DS03M(C1P)) or a 3-channel
controller (NC301P2), depending on a purchased model of the door station.
You can connect to the door station devices of different types. In addition to the doors (door
locks) it can be garage door openers, light switches, alarm systems and so on. You can connect one
device to the 1-channel controller and three devices to the 3-channel controller.
Using a 3-channel controller, you are able to operate three different locks via one door station,
that can be useful, for example, if you need open a gate, a garage door and a front door.
Controller type: choose the type of the controller.
Duration: set how long controller's outputs must be closed (depending on the type of a lock
and its controller).
Close by call: if necessary, you can set closing relay output contacts on pressing the call
button of the door station (for example, when connecting a door bell).
LED light night mode: IR illumination of the door station has two operation modes: "On
request" and "Always on".
The "On request" mode allows the IR LED to operate only on pressing the call button of the
door station or in case of request of the program client to receive a video stream (for example,
watching video image using PC applications or a web browser).
In the "Always on" mode the door station automatically switches between "Day" and "Night"
modes on sensor without any additional influences from outside.
The "On request" mode is set by default.
The "On request" mode is preferable, because it increases LED's operating time as well as
allows the door station to be invisible from the outsiders at night.
IP Video Door Station DS03M(P) Operation User Manual
Chapter 11. Config: Controller
Pic. 11.1
Chapter 11. Config: Controller
41
Advertisement
Table of Contents
