Video Parameters - Beward DS03M Operation User's Manual

7.4. Video Parameters

The "Video Parameters" menu is shown on the Picture 7.4.
Image Color: set image parameters such as brightness, contrast, hue and saturation within
the range from 0 to 255. You can see the image changes immediately, moving the slider. Click an
icon to the right of a name to set any parameter by default (Pic. 7.4).
Day/Night Mode: set the parameters of day and night operation of the door station camera:

Schedule: day and night modes switch on the schedule you specify in the fields below.

Light Sensor: day and night modes switch on the signal of a built-in light sensor. You can
choose an operation mode of the sensor in the drop-down list below. "High Level" means
that the camera operates in the day mode at a high level of external light and in the night
mode at the low level. The "Low Level" mode operates in the opposite way.
IR Cut Filter / IR Light Modes: there are two operation modes for the filter and an IR LED,
"Low Level" and "High Level".

ICR (Infrared Cut filter Removable):
"High Level": the filter allows for IR illumination to be filtered out during day operation
o
and then exposed to the sensor during night operation.
"Low Level": the filter allows for IR illumination to be exposed to the sensor during
o
day operation and then filtered out during night operation.

IR Light: using the built-in IR LED in conditions of a low level of external light.
"High Level": the LED is disabled during day mode operation and enabled during
o
night mode operation.
"Low Level": the LED is enabled during day mode operation and disabled during night
o
mode operation.
Press the [Save] button to apply new settings.
IP Video Door Station DS03M(P) Operation User Manual
Pic. 7.4
Chapter 7. Config: Video Settings
22