Table of Contents
Advertisement
The coding type for the video stream is specified in the coding settings.
NOTE!
Bitrate depends on the access channel given by the ISP when you connect to the door station from
Internet.
The "RTSP Setting" menu is shown on the Picture 8.8.
Enable: enable the RTSP function.
Enable Authentication: tick off this option if it needs to use an authorization procedure to
receive
the
RTSP
rtsp://<IP>:<PORT>/av<X>_<Y>&user=<USER>&password=<PASS>, where <USER> – user
name, <PASS> – password.
Here is request for example:
rtsp://192.168.0.99:554/av0_0&user=<admin>&password=<admin>.
Packet Size: set the necessary size of a data packet. By default: 1372.
Port: RTSP port. By default: 554.
Press the [Save] button to apply new settings.
IP Video Door Station DS03M(P) Operation User Manual
stream.
The
following
Pic. 8.8
request
must
Chapter 8. Config: Network Settings
be
used
in
this
case:
30
Advertisement
Table of Contents
