Adjust Size And Content Of The Render Box - GE VOLUSON 730Pro Basic User Manual

Volume Mode
3D Full-size Display:
[Single] screen format key illuminated.
The rendered 3D image is magnified and displayed in a full-size format without the
sectional planes A, B, and C.
11.4.1.2

Adjust Size and Content of the Render Box

The horizontal and vertical dimension of the box may be varied by the trackball controls.
Note: Benefit of a bigger box: higher resolution
Benefit of a smaller box: faster calculation time
Press the upper trackball key to change the function from image position to ROI size.
Place the information to be rendered into the render box:
The selected image A,B or C is positioned in relation to the render box with the
trackball.
Important: Structures which obstruct the free sight to the object can be positioned out of the box.
The magnifier control varies the size of the contents of the box within image A, B, C in
relation to the render box.
Note: The magnification of the entire 3D image without changing the contents of the box is only
possible in
Important: With the rotation controls the direction of view of the 3D image is selected.
11-34
Select reference image A, B or C with the left trackball key.
The rotary controls and the trackball are assigned to the reference image for
the adjustment of the render box functions.
3D Pictogram Mode (chapter
The Rotation controls rotate the contents of the box
relative to the render box.
11.4.1.3).
®
Voluson 730Pro - Basic User Manual
105831 Rev. 0