Distance Measurement; Distance + Ellipse Measurement - GE VOLUSON 730Pro Basic User Manual

Basic Measurements
13.4.2

1 Distance + Ellipse Measurement

1. Select the [Dist. & Ellipse] item.
2. Move the cursor to the start of the measurement and press the right or left trackball key.
A second cursor appears.
3. Move the second cursor to the second point of the measurement and press the right or left
trackball key.
4. To re-adjust the start point, press the upper trackball key. It alternates between the cursors.
An Ellipse appears, the axis of which is defined by the two points.
5. Adjust the width of the ellipse and press the right or left trackball key.
The measurement result will be displayed.
6. When using single image mode, make first measurement.
Press [Freeze] to return to scan mode and scan the second image.
Press [Freeze] again. A new cursor appears.
7. Perform the measurement of the distance (axis) in the same manner.
Remarks:
•
The volume of the ovoid is displayed.
13.4.3

1 Distance Measurement

1. Select the [1 Distance] item.
2. Move the cursor to the start of the measurement by the trackball and press the right or left
trackball key. A second cursor appears.
3. Move the second cursor to the second point of the measurement by the trackball and press the
right or left trackball key.
To re-adjust the start point, press the upper trackball key [Change] before completing the
measurement. It alternates the control from one cursor to the other.
Remarks:
•
The volume of the globe of the diameter defined by the two points is displayed.
13-8
To measure volume using one Distance and Ellipse.
To measure a globe-like volume using one distance.
®
Voluson 730Pro - Basic User Manual
105831 Rev. 0