Vocal - Edit Contour - GE VOLUSON 730Pro Basic User Manual

11.6.2

VOCAL - Edit Contour

You will enter this menu:
•
From the VOCAL - ROI Mode menu - if a (shell) contour is defined.
•
From the VOCAL - Manual menu - if a (shell) contour is already generated.
In the VOCAL Edit menu the generated contours can be manipulated.
The VOCAL™ contour Editor
When entering this menu the screen appears as follows:
•
The reference image shows the first generated contour, outlined with red and yellow dots.
•
In the orthogonal slices the intersection curves between the shell geometry and the different image
planes are outlined as a yellow contour.
•
The shell geometry is visualized in the lower right quadrant.
The "VOCAL Edit Contour" menu appears in the menu area on the monitor.
Modifying the Contour:
When moving the trackball the dots change to yellow with respect to the position of the cursor.
If the cursor is positioned close to the contour line only one dot is yellow. By increasing the distance,
more dots become yellow.
®
Voluson 730Pro - Basic User Manual
105831 Rev. 0
Volume Mode
11-71