Volume Acquisition: 3D Sectional Planes - GE VOLUSON 730Pro Basic User Manual

Volume Mode

11.2 Volume Acquisition: 3D Sectional Planes

1. Activate the Volume mode (hard key).
Note: The selected format will be present in read mode after the acquisition is done.
5. Place the Volume box over the region of interest.
The trackball has two functions: position and size of the Volume box
The activated function is displayed in status area on the monitor.
Press the upper trackball key to change the function of the trackball from position
to size or vice versa.
6. Change the size of the Volume box by moving the trackball.
↑
Moving:
↓
→
←
7. Set the volume sweep angle using the toggle switch shown in the status area.
11-12
2. Select [Sect. Planes] Visualization mode from the menu area.
3. Select a 3D User Program (e.g., Default).
The preset values are loaded.
4. Select the display format desired.
decrease the box size in vertical direction
increase the box size in vertical direction
increase the box size in horizontal direction
decrease the box size in horizontal direction
®
Voluson 730Pro - Basic User Manual
105831 Rev. 0