Probe/Program Selection - GE VOLUSON 730Pro Basic User Manual

Starting the System
Probe holders:
Always store the probes in the intended probe holders.
4.5

Probe/Program Selection

This menu shows the connected probes.
The denomination of each transducer connected to the system appears on the screen.
Probe selection is done with the trackball. The field with the selected probe is illuminated.
At the same time the available applications of the selected probe are displayed in the [Application]
field.
Upon selection of an Application, a maximum of 7 User program fields appear in the [User Settings]
field, and a default setting. The DEFAULT Setting is not rewriteable for the User.
The "User Setting" selection is also done with the trackball.
For each probe up to 7 programs can be stored .
User Settings enables speedy adjustment of the system for different fields of application.
To store a user setting under an application, review:
[Probe] key (hard key)
This key activates and deactivates the "probe select" menu.
Behavior of probe select function, when connecting/disconnecting a probe,
see: Transducer Connection
4-4
User Settings
(chapter 4.4)
Voluson
(chapter 17.3.2).
®
730Pro - Basic User Manual
105831 Rev. 0