GE VOLUSON 730Pro Basic User Manual page 78

Starting the System
Note: Patient data on different systems such as the Voluson 730Pro or 3D View 2000 are only
distinguished by the Patient Identification (ID) field!
If you do not use the default auto-generated ID please make sure that this identification (ID) is
unique on all systems for the same patient!
If temporary measurements exist:
The system will display an info dialog " Start Exam with previous measurements?" on the monitor.
To quit the dialog:
The patient info is temporarily stored, the Patient procedure is closed and the previous operating state
is activated.
Four different applications can be selected:
General (chapter 4.6.3.1)
OB (chapter 4.6.3.2)
GYN (chapter 4.6.3.3)
Cardio (chapter 4.6.3.4)
4-10
[Yes]: The actual measurements are dedicated to the exam.
[No]: The actual measurements are cleared.
Default: General
®
Voluson 730Pro - Basic User Manual
105831 Rev. 0