Replacing The Co And Fine Dust Filter Unit - SPECTRO SPECTROTEST Original Operating Instructions

Maintenance
7.6 Replacing the CO
Warning! Risk of injury and health hazard!
The CO
2

The applicable safety data sheet is available at
http://www.spectro.com/msds.

Protective gloves and goggles must be worn when replacing the filter unit.

When disposing of the filter unit, compliance with legal regulations is
mandatory.
To replace the filter, proceed as follows:
1. Switch the instrument off (see page 22)
2. Release the "unit/transport
carriage" locking mechanism
and take the instrument off the
transport carriage.
3. Loosen the knurled screws.
— 36
and fine dust filter unit
2
filter unit (optional) contains chemicals.
Fig. 15
Fig. 16
SPECTROTEST — 05.12.2017