Sam4s SPS-300 Series Manual page 42

Voice Authorization
1. Turn the key lock to the Z position, press 00 to select MPP function and then enter 706 CASH.
The tip amount displays.
2. The display will prompt for entries in the following sequence:
•
•
•
•
•
•
3. Enter data for each step as prompted and press the CASH/TEND key after each entry. The
receipt will print as in the example below:
Input Serial Number
The serial number of the register must be entered for security purposes.
1. Turn the control lock to the Z position to display the RESET REPORT MODE menu.
2. Press PAGE DOWN to view the remaining Reset Mode options and then Press 00 to access the
MPP FUNCTION menu.
3. Enter 777 and press the CASH key. The screen will display "Input S/N".
4. Enter the 10-character serial number. If the serial number contains alpha characters, enter those
characters using the alpha entry method set for your register, either alpha overlay or character
codes. (You must use character codes on the 21-PLU raised-key model.) Remember, if you are
entering via the Descriptor Code Method, you must press the decimal key after each 2-digit
character code. Press the CASH key to finalize the serial number entry. The register returns to
the RESET REPORT MODE menu screen.
42 • Integrated Payment Operations
ENTER ACCT NO
ENTER EXP DATE
ENTER CVD NO.
ENTER ZIP NO
ORIG TRAN AMOUNT
ENTER APP CODE
DATE 09/14/2017 TUE
VOICE AUTHORIZATION
--------------------------------
XXXXXXXXXXXX6781
TX ID : 107971
APP CODE : 123456
INVOICE NUM :
ANNIE
TIME 10:56
$10.00
CVD: Y
41056
000073 00000
SPS-300 SmartECR Supplement v1.11