Note: If you are Using an SD Card for the First Time . . .
NOTE: You must a use an SD card with a capacity of 1GB or smaller. SD cards must be formatted as
FAT 32.
CAUTION: Formatting the SD card will clear all data on the SD card and prepare it for use.
1. Start Windows Explorer.
2. Select the SD card drive, right click and select Format.
(Windows XP screen is shown; slightly different procedures are used with different operating systems.)
Select
"Format..."
3. From the Format dialog, you must select the File System: FAT32.
10 • SPS-300 Series Program Information
SPS-300 SmartECR Supplement v1.11