Sam4s SPS-300 Series Manual page 19

System Option Definitions
SmartECR related system option definitions.
EFT DRAFT IS
MSR CONNECTED
PIN PAD TYPE
PIN PAD (0-4)
NO SIGN IF
TRANSACTION TTL
LESS THAN 0.00
Reserved
TRANS PLUs TO MPP
INPUT CVD ?
INPUT AVS ?
DEBIT CASH BACK
GIFT CARD CASH OUT
EFT SUPPORT NEW
EMV PROTOCOL
SPS-300 SmartECR Supplement v1.11
Y or N Set to Y: mBox for a normal draft with SmartECR.
N: FINE DINING is not used with SmartECR.
0, 1 or 2 Set to 0: reserv. Setting to 1 or 2 is not supported.
Y or N Always choose Y: DUKPT (only type supported.)
0 - 4 Set to 0 when using SmartECR.
00.00 Leave at 00.00, is not used with SmartECR
0 Leave at 0.
Y or N Always N, not used with SmartECR.
Y or N Select Y if you want to require input of the CVD
(Card Verification Data) security code.
Y or N Select Y if you want to require input of the AVS
(Address Verification Service) security code.
Y or N Select Y to allow cash back on Debit Card
transactions.
Y or N Select Y to allow Cash Out on transaction tendered
with a Gift Card.
Y or N Select Y when integrated payment equipment is
setup to accept EMV (chip cards).
SPS-300 Series Program Information • 19