Warning And Indicator Lamps In The Instrument Cluster - Mercedes-Benz E-Class Saloon Owner's Manual

Warning and indicator lamps in the instrument cluster

Display messages
Â
Key not detected Key not detected
(white display mes-
sage)
Â
Remove starting Remove starting
button, then button, then
insert key insert key
Warning and indicator lamps in the instrument cluster
General notes
Some systems carry out a self-diagnosis when the ignition is switched on. Several warning and
indicator lamps can thereby temporarily light up or flash. This behaviour is non-critical. These
warning and indicator lamps only indicate a malfunction if they light up or flash after the engine
is started or during a journey.
Safety
Seat belts
Problem
ü
Only for certain coun-
tries: the red seat belt
warning lamp lights up
for 6 seconds after the
engine starts.
ü
Only for certain coun-
tries: the red seat belt
warning lamp lights up
after the engine starts.
In addition, a warning
tone sounds for up to
6 seconds.
Possible causes/consequences and M M Solutions
The KEYLESS-GO key cannot be detected at present.
Change the location of the key with the KEYLESS-GO functions
X
in the vehicle.
If the KEYLESS-GO key is still not detected:
Operate the vehicle with the key in the ignition lock if necessary.
X
The KEYLESS-GO key is not continually detected.
KEYLESS-GO is temporarily malfunctioning or is defective. A warn-
ing tone also sounds.
Insert the key into the ignition lock and turn it to the desired
X
position.
Visit a qualified specialist workshop.
X
Possible causes/consequences and M M Solutions
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
Fasten your seat belt (
X
The driver's seat belt is not fastened.
Fasten your seat belt (
X
The warning tone ceases.
page 48).
Y
page 48).
Y
329
Z