Table of Contents
Advertisement
Removing and fitting
To install: insert retainer ; of box : into
X
slots =.
Raise box : and press hooks A into
X
anchorage ? as far as they will go.
Turn left-hand rotating catch B clockwise
X
and right-hand rotating catch B anti-clock-
wise by 90°.
To remove: turn left-hand rotating catch
X
B anti-clockwise and right-hand rotating
catch B clockwise by 90°.
Move box : downwards and pull it out
X
from anchorages ?.
i
Store the EASY-PACK boot box on a flat
surface after removal, e.g. on a suitable
shelf.
EASY-PACK load-securing kit (Estate)
Components and storage
The EASY-PACK load-securing kit allows you
to use your luggage compartment for a variety
of purposes. The accessory parts are located
under the luggage compartment floor.
Open the EASY-PACK folding luggage-com-
X
partment floor (
page 357).
Y
EASY-PACK load-securing kit accessory parts
Telescopic rod
:
Bag containing the brackets and luggage
;
holder
Inserting the brackets into the loading
rail
Insert bracket : into the centre of loading
X
rail ?.
Press release button ; and push
X
bracket : into the desired position in load-
ing rail ?.
Let go of release button ;.
X
Press locking button =.
X
Bracket : is locked in loading rail ?.
If necessary, fold lashing eyelet A
X
upwards.
Stowage areas
Z
355
Advertisement
Table of Contents
