Mercedes-Benz E-Class Saloon Owner's Manual page 219

Driving systems
216
Selecting variable SPEEDTRONIC
If there is a change of drivers, advise the new
driver of the limit speed stored.
Check whether LIM indicator lamp : is on.
X
If it is on, variable SPEEDTRONIC is already
selected.
If it is not, press the cruise control lever in
the direction of arrow ;.
LIM indicator lamp : in the cruise control
lever lights up. Variable SPEEDTRONIC is
selected.
Storing the current speed
Briefly press the cruise control lever up :
X
or down ;.
The current speed is stored and shown in
the multifunction display.
The segments in the multifunction display
light up from the start of the scale up to the
stored speed.
You can use the cruise control lever to limit
the speed to any speed above 30 km/h while
the engine is running.
Storing the current speed or calling up the
last stored speed
G WARNING
If you call up the stored speed and it is lower
than the current speed, the vehicle deceler-
ates. If you do not know the stored speed, the
vehicle could decelerate unexpectedly. There
is a risk of an accident.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
Briefly pull the cruise control lever towards
X
you :.
Setting a speed
To adjust the set speed in 10 km/h
X
increments: briefly press the cruise con-
trol lever up : beyond the pressure point
for a higher speed, or down ; for a lower
speed.
or
Keep the cruise control lever pressed
X
beyond the pressure point until the desired