Mercedes-Benz E-Class Saloon Owner's Manual page 372

The garage door opener is only available for
certain countries. Observe the legal require-
ments for each individual country.
®
The HomeLink garage door opener is com-
patible with most European garage and gate
opener drives. More information on Home-
®
Link and/or compatible products is availa-
ble:
at a qualified specialist workshop
R
®
via the HomeLink
R
(0) 08000 466 354 65 or alternatively
+49 (0) 6838 907-277
on the Internet at http://
R
www.homelink.com
Important safety notes
G WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming buttons
Pay attention to the "Important safety notes"
( page 369).
Y
Hotline
Garage door remote control A is not inclu-
ded with the integrated garage door opener.
Turn the key to position 2 in the ignition
X
lock ( page 179).
Y
Select one of buttons ; to ? to control
X
the garage door drive.
To start programming mode: press and
X
hold one of buttons ; to ? of the inte-
grated garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : begins to light up yellow.
Indicator lamp : lights up yellow immedi-
ately the first time button ;, = or ? is
programmed. If the selected button has
already been programmed, indicator
lamp : lights up yellow after ten seconds
have elapsed.
Release button ;, = or ?. Indicator
X
lamp : flashes yellow.
To program the remote control: point
X
garage door remote control A towards
buttons ; to ? on the rear-view mirror at
a distance of 5 to 20 cm.
Press and hold button B on remote control
X
A until indicator lamp : lights up green.
When indicator lamp : lights up green:
programming is finished.
When indicator lamp : flashes green: pro-
gramming was successful. The next step is
Features
369
Z