Table of Contents
Advertisement
To insert: insert cup holder : and slide
X
back catch ;.
To close: briefly press cover = at the
X
front.
Cover = moves back.
Removing/fitting the cup holder in the
centre console (vehicles with manual
transmission or AMG vehicles)
Removing
Prise groove ; away carefully on the front-
X
passenger side using a suitable tool until
lug = becomes visible.
Pull the cup holder upwards slightly to the
X
stop.
Prise groove : away carefully on the driv-
X
er's side using a suitable tool. At the same
time, pull the cup holder upwards slightly to
the stop.
Prise groove on driver's side : and front-
X
passenger side ; away alternately. When
doing so, lift the cup holder upwards until it
can be removed.
Fitting
Insert left-hand and right-hand grooves ;
X
of the cup holder into side-mounted springs
=. Insert the cup holder so that the wedge
of the upper section of cup holder : faces
forwards.
Press the cup holder downwards until it
X
engages on the front-passenger side.
Cup holder in the rear seat armrest
! Do not sit on or support your body weight
on the rear seat armrest when it is folded
down, as you could otherwise damage it.
! Close the cup holder before folding the
rear seat armrest up. Otherwise, the cup
holder could be damaged.
Vehicles with a rear bench seat
Fold down the rear seat armrest.
X
To open: lift the cover of the rear seat arm-
X
rest.
Press release catch :.
X
Cup holder ; folds out forwards.
Features
361
Z
Advertisement
Table of Contents
