Table of Contents
Advertisement
Stowage areas
358
by handle : until it reaches the desired
position and engages in side ?.
To close: disengage the EASY-PACK fold-
X
ing luggage-compartment floor and pull it
back.
Press the EASY-PACK folding luggage-com-
X
partment floor down ; until it engages.
Fitting and removing the folding lug-
gage-compartment floor
120° position
Remove combined luggage cover and net
X
(
page 352).
Y
To remove: move EASY-PACK folding lug-
X
gage-compartment floor : into the 120°
position and lift it upwards.
To install: push EASY-PACK folding lug-
X
gage-compartment floor : to the stop,
move it into the 120° position and allow it
to engage audibly.
Pull EASY-PACK folding luggage-compart-
X
ment floor : forwards.
EASY-PACK rear sill protector (Estate)
! Before closing the tailgate, refasten the
EASY-PACK loading sill protector on the
underside of the EASY-PACK folding lug-
gage-compartment floor.
The EASY-PACK loading sill protector could
otherwise be damaged.
The EASY-PACK rear sill protector is attached
to the underside of the EASY-PACK folding
luggage-compartment floor by means of mag-
nets. It is designed to prevent clothing
becoming stained and the paintwork being
scratched when loading.
Open the EASY-PACK folding luggage-com-
X
partment floor (
page 357).
Y
Use tab ; to detach EASY-PACK rear sill
X
protector : from the magnets and place it
over the loading sill.
Close the EASY-PACK folding luggage-com-
X
partment floor.
Roof carrier
Important safety notes
WARNING
G
When a load is transported on the roof, the
vehicle's centre of gravity rises and the han-
dling changes. If you exceed the maximum
roof load, the handling as well as steering and
braking characteristics are severely affected.
There is a risk of an accident.
Always observe the maximum roof load and
adapt your driving style.
! Mercedes-Benz recommends that you
only use roof carriers that have been tested
and approved for Mercedes-Benz vehicles.
This helps to prevent damage to the vehi-
cle.
Advertisement
Table of Contents
