Table of Contents
Advertisement
The combined luggage cover and net must be
fitted if you are using the folding bench seat
(
page 352).
Y
Folding out the folding bench seat
Make sure that the backrests of the rear
X
bench seat are locked in the upright posi-
tion.
Move the handle for the combined luggage
X
cover and net upwards (
Pull release handle : and fold the back-
X
rest of the folding bench seat upwards.
Hook the seat belts into retainers =.
X
Pull release handle ; and fold the folding
X
bench seat cushion into the sitting posi-
tion.
Push down the seat cushion until the back-
X
rest engages fully.
Fold the head restraints upwards.
X
page 352).
Y
Fitting and removing the seat cushion
You must remove the seat cushion if you wish
to lift the luggage compartment floor if the
vehicle has a flat tyre, for example.
To remove: fold seat cushion ; upwards
X
and remove it from seat cushion guides :.
To fit: push seat cushion ; into seat cush-
X
ion guides : at a slight angle from the rear
=.
Fold seat cushion ; back into its original
X
position ? until it engages.
Folding back the folding bench seat
Seats
129
Z
Advertisement
Table of Contents
